Home > News > Industry News

Tips for shower maintenance

2021-10-12

1. Install the faucet after removing the debris from the pipeline, try not to bump with hard objects during installation, and don't leave cement, glue, etc. on the surface, so as not to damage the gloss of the surface coating.

2. When showering, don't switch the shower too hard, just turn it gently.

3. The maintenance of the electroplated surface of the shower head is also very important. You can wipe the electroplated surface of the shower head with a soft cloth, and then rinse with water to make the surface of the shower head bright as new.

4. The ambient temperature of the shower head should not exceed 70°C. Direct ultraviolet light will also accelerate the aging of the shower head and shorten the life of the shower head. Therefore, the shower head should be installed as far away as possible from the heat source of electric appliances such as Yuba, and cannot be installed directly under the Yuba, and the distance should be above 60CM.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept